The Correct Usage Of E-cigarettes

Remove the suction nozzle of the e-cigarette atomizer. Then, inject e-cigarette liquid into the e-cigarette atomizer. Next, install the suction nozzle on the atomizer. Finally, rotate the e-cigarette battery and the e-cigarette atomizer together. The general manual transmission requires pressing five times to start the e-cigarette. When the battery head of the e-cigarette turns red, it indicates that the e-cigarette has begun to work.
When not in use, the indicator light will automatically go off. Generally, the charging time of each e-cigarette battery is controlled at 2 to 3 hours. Smokers usually take about 15 puffs of a regular cigarette. It is recommended to take 14 to 16 puffs of an e-cigarette and then stop for half an hour before continuing.
After 20 to 30 days of use, if the atomization volume still significantly decreases even when a new cigarette cartridge is used and the battery is fully charged, please remove the cartridge and insert a metal wire such as a pin into the small hole at the front end of the cigarette body. At this time, the simulated burning cigarette butt will continue to emit light. Insert for 10 seconds each time. Each recovery can be repeated twice. After the function is restored, it can be used normally. This switch should not be used frequently.